It would make engineering much simpler if all water traveled at the same speed.

It isn’t.

The quality of water that is pumped into a residential system is likely to fluctuate throughout the day. Commercial and industrial buildings may have operating highs. The flow of water in storms can be affected by weather conditions. Demand for clean water can also change in accordance with the purpose for which it is used.

Image credit: romtecutilities.com

As a result, designing a pump station isn’t simply a matter of identifying one flow number and selecting equipment capable of meeting it. Engineers need to know the possibilities of the conditions in which the equipment will be used.

Don’t just think about the capacity of your equipment, but also operational conditions

The greatest flow is vital, but this is only part of the process. Imagine a system for wastewater which is designed for high peak-flow. Most of the times, incoming flows may be considerably lower. When this happens however, the station has to function properly.

It also raises issues related to the sizing and size of the pump, control, head condition, and the best way to modify equipment when the demand for it changes.

A properly designed package pumping system can bring these aspects together around the actual requirements for the particular site, rather than thinking of maximum pump capacity as the entire design objective.

The daily routine of wastewater

In the course of the lifecycle of a wastewater lift station the conditions of the influent can change.

The station needs the ability to control the system to turn on the pumps and collect the water. The dimensions of the structural components, the pumping equipment and piping along with electrical components and controls, all play part in this process.

Other site-specific considerations may also affect the design. Romtec Utilities is able to include auxiliary equipment, like grinder vaults or odor-control equipment, depending on the needs of the. It is cheaper to design stations around a specific project rather than implementing the same configuration for each wastewater facility.

Stormwater can change much faster

Stormwater offers a completely different operating situation. During dry weather, a stormwater lift station is likely to not be utilized much. But during the most severe weather conditions, the station is likely to see a significant increase in activity. Stations can be a part of larger flood control techniques, such as detention or treatment, so the stormwater plan is an essential element of system design.

When constructing these systems Romtec Utilities considers a variety of factors, including the flow rate required, head condition, system size, needs of the site as well as environmental aspects.

Stations for commercial development may be very different from the ones designed for municipal stormwater applications.

Head Conditions Are Important Alongside Flow

Engineers need to be aware of where the water is going and what obstacles they have to overcome. Engineers must also know where that water is going and the resistance that the pumping system has to overcome.

The head condition of the pump is affected by several factors such as elevation changes in piping configurations, discharge conditions, and various other system characteristics.

The connection between flow rates and head is why choosing a motor based solely on its capacity does not work. The technology of the pump and station’s configuration have to be adjusted to the hydraulic conditions for the entire application.

Design the station for the conditions it will actually be exposed to

Romtec Utilities creates customized pumping system for wastewater, stormwater and clean water systems. They also develop systems for industrial, booster and other purposes. The procedure can involve budgeting and design in the beginning including complete plans, system supply, documentation, and startup, testing and commissioning.

The basic principle of engineering is that the real pumping systems don’t work in a set of conditions.

They also need to take into account project-specific hydraulic needs, along with the changing flow, demand and requirements. A successful station must be engineered for that reality.